HW group Ares 10 : GSM thermometer with web portal, e-mail and SMS alarms
Product is End of Life : 2022-07-30
Ares 10 is a cost-effective GSM thermometer for remote monitoring and alarming.
Produkty zamiennikowe:Znajdziemy odpowiedni produkt zastępczy spełniający Twoje wymagania - skontaktuj się z naszym działem sprzedaży.
Cechy
Prezentacja
Więcej informacji
Zobacz podobne produkty
Drukuj kartę produktu
Zamów ofertę
Twoja lista zapytań ofertowych
PDF
Cechy
Prezentacja
Więcej informacji
PDF
- Sensors: Max 3 sensors (3 measured values)
- Compatible sensors: 1-Wire / 1Wire UNI (RJ11)
- What can be measured: Illumination, temperature, humidity, current 4-20mA, voltage 0-60V, Pt100/1000 temperature probe, water flood at a point (1D) or in an area (2D)
- Digital Outputs (DO): None
- Digital inputs (DI): 2 dry-contact inputs for external detectors
- Pulse counting: S0 pulses can be counted at each DI
- Response to alarm: Dialing a number, SMS (5 destinations), e-mail, HWg-Push
- Configuration: Local – USB interface (Windows software does not need to be installed)
- Remote configuration: Web interface in the SensDesk.com portal – “AresConf” tab
- Logging: Data attached to e-mail or downloadable over USB
- Software: SensDesk.com portal, HWg-PDMS, Nagios plugin, 3rd party solutions
- Mobile app for displaying data: Android and iPhone (via SensDesk.com)
- FOTA: Remote upgrade (Firmware Over The Air) capability simplifies management of large-scale installations with hundreds of devices
- Temperature sensor: Included in the “Tset” start set. The cable can be extended to up to 60 m
Ares 10 is a cost-effective GSM thermometer for remote monitoring and alarming. Connect up to 3 external sensors (temperature, humidity, light intensity, ...) and 2 contacts (digital detectors). Use the free-of-charge SensDesk.com portal to configure the Ares, send alarms or display graphs. Ares 10 GSM/GPRS thermometer is easy to install and can be used anywhere as long as there is GSM coverage.
HWg-Ares10 GSM is an effective solution for remote environment monitoring (temperature, humidity) over GSM without an internal battery. Environment monitoring over the mobile network (GSM) can be installed quickly and easily with the Ares; all that is needed is power and GSM coverage.
The two RJ11 ports can be used to connect 3 external 1-Wire or 1-Wire UNI sensors (max. 3 measured quantities in total). HW group offers temperature, light intensity, humidity, voltage, current (4-20mA) and other sensors.
Two digital inputs, IN1 and IN2 (green terminal block), can be used to connect simple status detectors (open/closed contacts). Relays of smoke detectors, open door detectors, water flood detectors etc. can be also connected to these inputs. States of detectors and sensors can be checked with a text message.
Alarm reaction can be as simple as sending an e-mail or a text message (SMS) whenever a contact is closed or a temperature exceeds the specified range. As a unique feature, after sending an alarm SMS (e.g. SMS temperature alert), the device can dial the target phone number and let it ring for a few seconds. Alarm status information can be sent to up to 5 phone numbers and 5 e-mails. More recipients can be reached by alarm escalation in the SensDesk.com portal.
As an important advantage, with Ares 10 GSM alarm thermometer, sensor readings can be plotted in a chart and the device can be configured using the SensDesk online portal (free of charge service provided by the manufacturer). Another option is to display the graphs in HWg-PDMS (free software) which retrieves the values by e-mail.
HWg-Ares10 GSM is an effective solution for remote environment monitoring (temperature, humidity) over GSM without an internal battery. Environment monitoring over the mobile network (GSM) can be installed quickly and easily with the Ares; all that is needed is power and GSM coverage.
The two RJ11 ports can be used to connect 3 external 1-Wire or 1-Wire UNI sensors (max. 3 measured quantities in total). HW group offers temperature, light intensity, humidity, voltage, current (4-20mA) and other sensors.
Two digital inputs, IN1 and IN2 (green terminal block), can be used to connect simple status detectors (open/closed contacts). Relays of smoke detectors, open door detectors, water flood detectors etc. can be also connected to these inputs. States of detectors and sensors can be checked with a text message.
Alarm reaction can be as simple as sending an e-mail or a text message (SMS) whenever a contact is closed or a temperature exceeds the specified range. As a unique feature, after sending an alarm SMS (e.g. SMS temperature alert), the device can dial the target phone number and let it ring for a few seconds. Alarm status information can be sent to up to 5 phone numbers and 5 e-mails. More recipients can be reached by alarm escalation in the SensDesk.com portal.
As an important advantage, with Ares 10 GSM alarm thermometer, sensor readings can be plotted in a chart and the device can be configured using the SensDesk online portal (free of charge service provided by the manufacturer). Another option is to display the graphs in HWg-PDMS (free software) which retrieves the values by e-mail.
- Ares 10 is a simple GSM thermometer:
The “HWg-Ares10 Tset” quick start set contains a temperature sensor, a universal power adapter and an external antenna.
- Remote firmware upgrade (FOTA) capability simplifies management of large-scale installations with hundreds of devices.
Applications and usage examples
Mechanical:
76 x 93 x 28 mm, wall-mountable, fits on a DIN rail
Power supply:
9–30 VDC / 0.5 A external power
Internal battery:
none
GSM/GPRS:
Quad-Band 850/900 / 1800/1900 MHz - SMA antenna connector
Roaming:
GPRS is deactivated when GSM roaming is detected
Diagnostics:
External power detection, battery status [%]
Alarms:
Email, HWg-Push, SMS
SMS + ring upon alert:
Supported
Protocols:
SMTP, NTP, HWg Push (http)
Authentication:
STARTTLS (Google SMTP)
SMS communication:
Basic control with status information
Support for programmers:
HWg SDK
Supported software
SensDesk: Monitoring the Ares GSM unit via the web portal
- Remote temperature monitoring over GSM, temperature and humidity meter
- Electricity distribution networks (transformer stations)
- Water source monitoring, including technical equipment status
- Agricultural production premises (greenhouses, granaries, etc.)
- Concrete hardening
- Road, highway, railroad technology
- Temperature and thermal expansion of structures
- Information systems (booths)
- Diesel generators – environment monitoring
- Wireless temperature monitoring system for telecommunication infrastructure
- Remote server room monitoring without connecting to the local LAN
- Automatic teller machines – environment monitoring without tampering with the ATM connection
SENSORS |
|
Mechanical:
76 x 93 x 28 mm, wall-mountable, fits on a DIN rail
Power supply:
9–30 VDC / 0.5 A external power
Internal battery:
none
GSM/GPRS:
Quad-Band 850/900 / 1800/1900 MHz - SMA antenna connector
Roaming:
GPRS is deactivated when GSM roaming is detected
Diagnostics:
External power detection, battery status [%]
Alarms:
Email, HWg-Push, SMS
SMS + ring upon alert:
Supported
Protocols:
SMTP, NTP, HWg Push (http)
Authentication:
STARTTLS (Google SMTP)
SMS communication:
Basic control with status information
Support for programmers:
HWg SDK
Supported software
- HWg-PDMS: Logging, export to MS Excel, reports
SensDesk.com public online portal
SensDesk: Monitoring the Ares GSM unit via the web portal
- In the Ares unit, configure your SensDesk account username and password.
- Connect to www.sensdesk.com to view the readings from sensors connected to your Ares.
- SensDesk web portal can be used to configure Ares GSM units.
- The SensDesk web portal supports both Ares products (Ares 10 and Ares 12).
- SensDesk web portal can be used to control the relay outputs of the expansion module connected to the Ares unit.
- SensDesk web portal can be used to send an alarm e-mail if the Ares unit or the GSM communication fails.
SensDesk Mobile app
- All devices connected to your SensDesk account can be viewed in the SensDesk Mobile app.
- The app is available for iOS and Android.
- Sensors can be sorted by sensor name, device name etc.
PDMS: Data collection in MS Windows via E-mail
- The HWg-PDMS software for MS Windows runs on a PC and downloads data from an e-mail account.
- Ares GSM monitoring unit periodically e-mails the data to a dedicated e-mail account.
- PDMS periodically downloads the e-mails and reads the data.
- Registered version is free of charge for three sensors
- Collects data over IP (via an e-mail inbox)
- Data collection runs in the background as a Windows service
- Graphical overview of the collected data
- Simple export to MS Excel (runs periodically in the background)
- 1) E-MAIL:
Through the email interface. Ares sends e-mails to a dedicated mailbox, where PDMS periodically downloads them.
PDMS processes e-mails with attached LOG files as well as alert messages.
- 2) HWg-Push:
HWg-PDMS is installed on a server with a public IP address. Ares periodically sends data from connected sensors over HTTP.
- PDMS monitoring software
PDMS: Excel reportsHWg-PDMS periodically collects input states and sensor values from Ares gsm data logger units connected over GSM/GPRS and other Poseidon, Damocles and HWg-STE units connected over IP. Measured data are periodically stored into a database and exported as MS Excel reports.
How to connect Ares to PDMS
Ares family
| Internal battery | Digital inputs (+ pulse counter) | Sensors (1-Wire / UNI ) | Digital outputs (external module) | Logger | SMS alerts | Email alerts (GPRS) | SensDesk (HWg Push) | |
|---|---|---|---|---|---|---|---|---|
| HWg-Ares 10 | no | 2 | 3 | no | yes | yes | yes | yes |
| HWg-Ares 12 | yes | 2 | 14 | yes | yes | yes | yes | yes |
Ordering Information and Accessoires
| HWg-Ares12 set | HWg-Ares 12 quick start set Ares12 quick start set, contains a GSM QuadBand antenna + 3m cable, a universal power adapter (EU, UK, US), a CD, the Ares GSM unit (with an internal battery), a USB cable for configuration, a temperature sensor and a mounting bracket. |
| HWg-Ares12 Bulk | HWg-Ares12 with a mounting bracket Ares12 unit (with the internal battery) and a type D mounting bracket. No other accessories. |
| HWg-Ares12 plain | HWg-Ares12 unit only Ares12 unit (with the internal battery) for GSM industrial monitoring. No other accessories. |
| HWg-Ares10 set | HWg-Ares10 quick start set Quick start set with the Ares10, contains a GSM QuadBand antenna + 3m cable, a universal power adapter (EU, UK, US), a CD, the Ares GSM unit, a USB cable for configuration, a temperature sensor and a mounting bracket. |
| HWg-Ares10 plain | HWg-Ares10 unit only Ares10 GSM thermometer unit only. No other accessories. |
| Mount plate E – 1U | Mounting bracket for a rack, 1U installation of HWg-Ares, Poseidon2 3266/68 and other products. |
| Mount plate D | Bracket for attaching HWg-Ares, Poseidon2 3266/68 or other products to a wall. |
| DIN Rail box set | DIN rail mounting bracket. |
Klienci, którzy już przeglądali ten artykuł, zobaczyli również